Spiral bevel
Spiral bevel gears are designed for applications that require high speed and high torque power.
Lower noise, higher rpm capabilities, improved surface finish, and lower vibrations.
Technical Information
we can supply Diameter up to 1000 mm
Straight bevel gears
Straight bevel gears have many different uses across industries such as industrial and commercial, material handling, automotive, pumps, and many other industries.
Contact patterns - localized assist in smoother running straight bevel gears
Technical Information
We can supply Diameter upto 500 mm module 10.
Hypoid bevel gears
Hypoid gears are similar to spiral bevel gears except that they operate on non-intersecting axis.
Less sliding and high efficiency result in smaller capacity motors.
Crown wheel and Tail pinion
A crown wheel and a tail pinion is a gearing mechanism which is used to get high torque.
In a worm and worm wheel arrangement, this type of geared set contains a crown and a pinion which are having spiral teeth cut on them.
Spur gears
Spur gears or straight-cut gears are the simplest type of gear.
Type : Cylinder or disk with teeth projecting radially.
Technical Information
Profile grinding upto 1500 mm Diameter.
Worm gear and worm shaft and rack & pinion
Worm gears are usually used when large speed reductions are needed.
Reduction ratio is determined by the number of starts of the worm and number of teeth on the worm gear.
Spline shafts
Splined shafts specifically have a number of equally spaced grooves cut in the shafts so as to form a series of projecting keys and fitting into an internally grooved cylindrical member.
Sprockets
A sprocket or sprocket-wheel is a profiled wheel with teeth, or cogs, that mesh with a chain, track or other perforated or indented material.
Sprocket' applies generally to any wheel upon which radial projections engage a chain passing over it.
Helical gears
Helical gears are one type of cylindrical gears with slanted tooth trace.
Compared to spur gears, they have the larger contact ratio and excel in quietness and less vibration and able to transmit large force
Technical Information
Profile grinding upto 1200 mm diameter.
Diameter upto 1500 mm.